We might earn income from the merchandise out there on this web page and take part in affiliate applications. Be taught Extra

Up to date Jul 24, 2023 4:38 PM

The arrow quiver is a type of items of drugs that bowhunters usually don’t take into consideration an excessive amount of. Till it’s an issue. The job of the quiver is fairly easy: carry arrows. That’s it. That’s all it does.

And infrequently occasions, bowhunters merely search for the most cost effective quiver they’ll discover, or one which finest matches their bow to finish a killer look. They don’t all the time take note of the working components of the quiver that earn its hold when the warmth is on.

So what would you like in a quiver? You need one which holds your arrows firmly in place, protects you out of your broadheads, stays quiet, doesn’t stick out awkwardly, and, in fact, appears cool.

Lancaster Archery Provide carries nearly each looking quiver available on the market—actually all the key gamers within the recreation. I get the prospect to see, contact, and really feel all of those quivers as they arrive in stock, so I do know all of them fairly properly. However in looking for the very best looking quivers for this text, I took some further steps to check practically two dozen quivers.

I put arrows within the grippers and broadheads within the hoods to see how they maintain. For the bow-mounted fashions, I mounted them on my bows to review their profiles and impact on steadiness, and I took photographs to hear for any noise brought on by vibrating components—the coal-mine canary of unhealthy bow quivers.

Combining that information and testing, I got here up with the next picks for finest looking quivers within the following classes:

The Greatest Bow Quivers: Opinions and Suggestions

Greatest General: Nock On Checkmate

Bow Hunting Gear photo

Key Options

  • 19 inches lengthy, made from high-modulus carbon and aluminum
  • Curved hood for wind deflection
  • Easy, quick fast disconnect
  • Holds 5 arrows, plus a bonus arrow
  • Low-profile design
  • Deep, protecting hood with sturdy, dense rubber
  • Might be adjusted up and down and left and proper for good steadiness
  • Holds arrows from micro-diameter as much as 23 diameter
  • Retractable hanging hook


  • Can be utilized on the bow or be rapidly indifferent
  • Completely silent in all makes use of
  • Rubber arrow gripper has separate notches to carry the skinniest arrows as much as 23 diameter
  • Curved hood helps lower by means of the wind
  • Features a one-arrow holder on the bow mount, so when you take away the quiver for looking, you will have a follow-up arrow all the time on the prepared


Bow Hunting Gear photo
The creator discovered the Checkmate to be silent in use. P.J. Reilly

The Nock On Checkmate is John Dudley’s newest contribution to the archery world. He sat down and considered each function he’d wish to see in a quiver, after which he constructed that quiver.

The Checkmate is nineteen inches lengthy, and made from high-modulus carbon and aluminum. The hood is 2.5 inches deep and crammed with rubber foam to carry practically any broadhead available on the market securely. Additionally, the hood is curved to assist deflect facet winds in order that they don’t have an effect on the bowhunter as a lot as if it have been flat. And it’s obtained a retractable ring on the again that may be pulled up for hanging the quiver in a tree stand.

The decrease arrow gripper has two notches in every arrow seat to accommodate tremendous skinny or fatter looking arrows. A type of grippers factors instantly again on the archer to permit for the quick rear deployment of one of many arrows.

Bow Hunting Gear photo
The only arrow gripper means that you can take away your quiver and nonetheless have an arrow able to go. P.J. Reilly

The bow mount includes a quick-detach system. Raise a lever, and the quiver slides out. Push the quiver into the receiver and push the lever down, and the quiver is locked in place.

And that bow mount consists of two arrow grippers to carry a single arrow. So let’s say you detach your quiver whereas looking in a tree stand. You’ll be able to load one arrow in these grippers, so that you’ve all the time obtained a follow-up arrow on the prepared.

The quiver could be adjusted up and down and out and in to get it to sit down precisely the place you need it for good steadiness in your bow.

Learn Subsequent: Greatest Path Cameras

Greatest Finances: Octane Furnace 4-Arrow Quiver

Bow Hunting Gear photo

Key Options

  • Removable, one-piece quiver
  • Deep hood with thick foam for seating broadheads
  • Twin arrow grippers along with the hood
  • Rapidly detaches
  • Holds 4 arrows


  • Prices lower than $35
  • Securely locks arrow in place with three connection factors
  • Adjustable peak to get the quiver in the fitting place in your bow
  • Fast-detach is quick and straightforward to make use of
  • Holds arrows of various diameters


  • The froth within the hood will break up over time
  • Received’t stand as much as a lot abuse
Bow Hunting Gear photo
The Octane four-arrow quiver will get the job performed for below $35. P.J. Reilly

Not everybody needs to—or can afford to—spend $100 or extra on a bow quiver. Some bowhunters simply need the least costly possibility for holding arrows securely. The Octane Furnace does that.

It’s a four-arrow quiver with two carbon rods connecting the hood to 2 arrow grippers. With three connection factors, arrows are going to remain put. And the grippers will securely maintain the most well-liked looking arrow shaft sizes.

The attachment level on the quiver slides up and down so you’ll be able to seat the quiver on the peak you need in your bow. That connection level pops out and in of the quick-detach base that’s mounted to the bow. A lever holds the 2 components collectively after which releases them from each other while you need to take away the quiver.

The hood is 3 inches deep and crammed with foam for seating broadheads. You’ll be able to take away the froth when utilizing subject factors or mechanicals that you just don’t need to sink into the froth.

This quiver isn’t constructed to deal with critical abuse, which is likely one of the causes it’s so cheap. However simply pay a bit of consideration to what you do with it, and it’ll final for a few years – particularly for tree stand and floor blind hunters who merely carry their bows from the truck to their looking websites.

Redline RL-1 Carbon Quiver 6-Arrow

The Redline RL-1 Carbon Quiver 6-Arrow is the best overall.

Key Options

  • 20 inches lengthy, but solely weighs 9.7 ounces
  • All carbon rods
  • Easy, but safe, fast disconnect
  • Holds six arrows
  • Low profile design
  • Deep, protecting hood with rubber lining and devoted broadhead seats
  • Might be adjusted so quiver prime stays beneath prime limb and arrows don’t lengthen past backside limb


  • You’ll be able to slide the quiver ahead or again to get it balanced on the bow
  • No rattling while you carry your bow or when capturing
  • Rubber arrow gripper holds shafts securely
  • Lengthy design is nice for securing arrows to the bow
  • Fast disconnect is quick and straightforward


  • The devoted seats for broadheads are nice for expandables and three-blade mounted broadheads, however they’re not superb for broadheads with two giant blades.

The Redline RL-1 Carbon Quiver is a six-arrow quiver measuring 20 inches lengthy, however solely weighing 9.7 ounces, because of all of the carbon in its development. There’s an similar, 3-arrow model that weighs 6.5 ounces if you wish to lower much more weight. Redline is a brand new participant within the compound accent market, however the folks behind the corporate have tons of expertise. This quiver is a good instance of the Redline aim, which is to supply high quality gear at a good worth. This quiver isn’t low cost, nevertheless it’s not over-the-top costly both.

The Redline RL-1 secures arrows with a gripper in the lower third.
The Redline RL-1 secures arrows with a gripper within the decrease third. P.J. Reilly

The lengthy design is a reasonably new development in quivers. I prefer it. With arrow shafts secured in grippers within the decrease third and on the tip, they really feel safer than while you’re utilizing a shorter quiver that grips them within the higher half of the shafts. 

The Redline RL-1 features protective rubber broadhead seats.
The Redline RL-1 options protecting rubber broadhead seats. P.J. Reilly

The RL-1 has nice rubber broadhead seats contained in the hood that work properly with any expandables and with three-blade, mounted heads. As I discussed, massive two-blade mounted heads received’t sit as neatly, however they’ll nonetheless be secured. 

If you wish to take the quiver off while you’re up within the tree stand, there’s a easy, metallic lever that you just elevate about 3 inches and then you definitely slide the quiver straight again. It’s tremendous safe and tremendous quiet.

The options of this quiver are all nice, nevertheless it vaulted to the highest of my listing once I put it on my Mathews V3X 33 and shot with it connected. It was whisper quiet, which is vital. However what I didn’t anticipate was how properly it allowed me to carry the bow. I used to be rock regular with the RL-1 on my bow with 4 arrows within the quiver. I held even steadier with it on than I did with it off. I’m certain it’s as a result of I used to be in a position to slide the quiver straight again towards me. With a slotted mounting bracket, you’ll be able to pull this quiver again towards you bit farther than you’ll be able to mainly some other quiver. So as an alternative of it sitting parallel to the riser, it may well sit parallel to the cables and string.

So the RL-1 is a well-made, light-weight, quiet quiver that holds arrows securely, and could be rapidly indifferent, or balances the bow properly when you select to shoot with it on. That’s the quiver grand slam.

The Conquest Talon is the best removable quiver.

Key Options

  • Distinctive, spring-loaded claws grip the mounting bracket
  • Thought-about a five-arrow quiver, nevertheless it’s obtained two further spots on the again facet that permit storage of two extra for a seven-arrow whole capability
  • Rubber lining within the hood
  • Grips arrow shafts in two locations, and has level seats within the hood
  • Comes with two units of arrow grippers—one for traditional looking arrows and one for micro-diameter
  • Rope tree-loop on the highest for hanging within the stand


  • The claw that you just squeeze to take away the quiver is exclusive and ridiculously straightforward to maneuver
  • Ridiculously light-weight
  • Twin shaft grippers maintain arrows nonetheless and quiet on the shot
  • Adjustable up and right down to get your arrows the place you need them on the bow
  • Holds seven arrows
  • Prices below $90


  • The purpose seats within the hood are spherical rubber cups, which I’m not an enormous fan of for holding broadheads

The Conquest Talon is the one quiver made by Conquest Archery, which is thought extra for its stabilizers. It’s light-weight, at simply 9 ounces, and options twin, rubber shaft grippers, which is uncommon for a 13-inch quiver. However these 2 grippers—plus the purpose seats contained in the hood—guarantee your arrow isn’t going wherever till you pull one out.

You’ll be able to alter the quiver up and down on the dual, carbon assist rods, after which lock it in place so it stays put the place you need it. However the principle function of this quiver is the fast disconnect. No different quiver available on the market has a disconnect just like the Talon.

The Conquest Talon features a unique and speedy claw-like disconnect.
The Conquest Talon includes a distinctive and speedy claw-like disconnect. P.J. Reilly

Primarily, it’s a claw that grabs maintain of the mounting block on the riser. The claws are held in place by spring-loaded arms. Squeeze these arms and the claws launch the mount block. You’ll be able to simply pluck this quiver off the bow with one hand in a second.

To be completely trustworthy, the Conquest Talon wasn’t on my radar as I used to be doing my preliminary analysis for this text. I had performed a video on it two years in the past when it got here out and hadn’t paid a lot consideration to it since. I noticed it within the Lancaster Archery Provide Professional Store and remembered the distinctive, quick-disconnect.

The Conquest Talon is on the bow.
The Conquest Talon attaches to the bow merely however successfully. P.J. Reilly

At first look, it looks as if there’s no manner the quiver claw that grabs the mounting block would have sufficient power to maintain the quiver from rattling. However it does. And the fast disconnect operates easier and quicker than some other I examined.

Greatest Fastened: TightSpot Pivot 2.5 2-piece

The TightSpot Pivot 2.5 Right Hand Quiver is the best detachable.

Key Options

  • Broadhead hood and arrow gripper are two separate items which can be connected individually to the bow
  • A number of included connectors match nearly any compound bow
  • Pivoting rods that permit the quiver to rework so it’s all the time vertical, whatever the bow
  • Screw-in arrow blocks that permit the person arrow grippers to regulate for fats or skinny arrows
  • Sturdy, stable foam block within the hood secures mounted or mechanical broadheads
  • Holds 5 arrows


  • Might be adjusted to suit practically all compound bows
  • As soon as set and fitted with arrows, it’s stable
  • No audible further noise added to the bow on the shot
  • Hood foam is deep and locks broadheads in place


  • I couldn’t tighten the bolt sufficient on the decrease half of my take a look at quiver to solidly lock down that piece. As soon as arrows have been in it, nevertheless, it didn’t transfer.

The TightSpot Pivot 2.5 2-Piece Quiver is an adjustable quiver that may be completely connected to only about any compound bow in quite a lot of configurations. Some bowhunters want quivers that aren’t removable, as a result of the quivers designed to connect and detach usually are those vulnerable to rattle when strolling and capturing.

The TightSpot Pivot affixed to bow.
The TightSpot Pivot consists of an unbiased hood and arrow gripper to mount at various connection factors. P.J. Reilly

The highest half—hood—and the underside half—arrow gripper—of this quiver are bolted onto the riser of a bow independently. TightSpot consists of a number of {hardware} items to match the various connection factors throughout the spectrum of compound bows available on the market. As soon as connected to the riser, the Pivot earns its identify from the adjustable rods that may be maneuvered so the quiver stands vertically on any bow. And the rods telescope so you’ll be able to lengthen or scale back the gap between the gripper and the hood. You may also push the quiver in towards the riser to supply a slim profile, or pull it out away if you have to work round different equipment.

Screws mounted in rubber wedges between the person arrow grippers could be pushed in, or backed out, which compresses or opens the grippers to accommodate arrows of various diameters. With the wedges screwed all the best way in, they’ll firmly maintain 4mm shafts. Backed out, you’ll be able to load 23-diameter shafts with out a downside.

The tender foam that fills the hood is my favourite form of foam for broadheads. No, it isn’t as sturdy as more durable rubber seats within the hoods of different quivers, nevertheless it holds broadheads in place higher than some other materials. And so long as you seat your broadheads in the identical holes within the foam each time you load your quiver, the froth will final for a few years.

The Kwikee Kwiver Lite-4 is the best budget quiver.

Key Options

  • Removable, one-piece quiver
  • Deep hood with skinny, stable rubber padding inside and information holes for arrow suggestions
  • Sturdy arrow gripper will maintain skinny and regular diameter looking arrows
  • Might be locked in with an included bolt
  • Light-weight at 8.4 ounces
  • Holds 4 arrows


  • Prices $30
  • With the Extremely-Lock bolt in place, it’s tremendous quiet
  • Actic-2 arrow holder stays pliable in freezing climate
  • Simply detaches with out the Extremely-Lock bolt
  • Even giant fixed-blade broadheads are completely enclosed within the hood


  • With out the Extremely-Lock bolt, it has a faint rattle
  • With the bolt in place, detaching isn’t as quick as with out it
  • Arrows lengthen beneath the underside cam

The Kwikee Kwiver Lite-4 was going to make my listing one way or the other as a result of it’s one of many uncommon items of compound bow tools that has remained just about unchanged for greater than three a long time. I can consider no different piece of compound gear that hasn’t morphed over time to alter the best way it features or the best way it appears. With that form of longevity with out transformation, you recognize The Kwikee Kwiver Lite-4 works.

It is a one-piece, removable quiver that holds 4 arrows. Arrows are held a few third of the best way down the shaft by the rubber Arctic 2 gripper, which doesn’t flip to rock when it’s chilly exterior.

The hood has a skinny, solid-rubber lining with information holes within the prime to obtain arrow factors. These holes mixed with the gripper maintain arrows fairly snugly in place.

The short-detach bracket employed by the Kwikee Lite-4 is similar because it’s all the time been. There’s a metallic leaf with a crimson plastic prime that you just pull again to insert the quiver. When the quiver is seated, the leaf springs again into place and the crimson prime then holds the quiver down.

To get the quiver fully silent, you’ll want the Extremely-Lock bolt, which mounts by means of the middle of the quiver arm and pins it to the bracket. It’s straightforward sufficient to unscrew it to detach the quiver, nevertheless it takes further time. With out that bolt, the quiver does rattle a bit on the shot.

The Kwikee Kwiver Lite-4 affixed to bow.
The Kwikee Kwiver Lite-4 affixes to the riser in an uncommon place. P.J. Reilly

The place the Kwikee Lite-4 sits on the riser is each good and unhealthy. The quiver sits form of in the midst of the bow, whereas others often sit larger. This decrease place causes arrows 27 inches and longer to increase beneath the underside cam on most bows, which suggests the nocks are always digging into the dust when you relaxation your bow on the underside cam. However that low place permits your bow to steadiness higher throughout a shot. It doesn’t make the bow prime heavy, like another quivers.

The Selway Slide-On Recurve Quiver is the best traditional quiver.

Key Options

  • Two-piece design
  • Slides over limbs
  • Hood is stable leather-based with thick, trad stitching
  • Foam insert contained in the hood is deep to obtain these massive conventional broadheads
  • Decrease, rubber gripper securely holds 5 arrows
  • Matches recurve bows with limbs 1.5-2 inches huge


  • Might be adjusted up and down on the limbs to carry arrows of any size
  • The ends twist to get the orientation of each halves in order that they maintain arrows parallel to the bow
  • Straightforward to put in
  • Appears tremendous conventional


  • Not essentially the most secure-fitting quiver

The Selway Slide-On Recurve Quiver tells you precisely what it’s within the identify. It’s a two-piece quiver that slides onto recurve bows. Every half slides onto a limb. 

Meeting is easy. Take away the bowstring and slide the hood over the higher limb tip and down towards the riser. Slide the arrow gripper over the decrease limb tip and up towards the riser. Place the 2 halves wherever to carry your arrows accordingly. The 2 items match pretty snugly, as long as the limbs are 1.5-2 inches huge. After all, they match the 2-inch limbs extra snugly than the 1.5-inch.

The Selway hood features a foam interior.
The Selway hood includes a foam inside. P.J. Reilly

The hand-stitched leather-based hood is what makes this quiver so trad. It appears cool and varieties the right container for my favourite broadhead-holding foam. Stuff an enormous, 135-grain Zwickey two-blade into this foam and it’s not going wherever, neither is it slicing anybody by accident.

With its all-rubber contact factors, the Selway is sweet and quiet on the bow on the shot. Although it may be a bit unfastened on the limbs as in comparison with a bolt-on quiver, there’s nothing metallic to rattle and make noise.  

Having arrows within the quiver really makes it safer on the bow as a result of arrows join the halves to 1 one other. And it holds these arrows inside straightforward attain in case a follow-up shot is required quick—a not-so-infrequent difficulty conventional bowhunters face.

Like I stated. The Selway Slide-On features nice. What seals its crown as the very best conventional quiver is its appears. It’s trad by means of and thru.

The Vista Knight is the best hip quiver.

Why It Made the Lower

It’s one of many solely hip quivers designed to carry broadheads left available on the market. It’s properly made, appears good and has my favourite sort of broadhead foam.

Key Options

  • Beautiful leather-based development
  • Sturdy rubber arrow grippers
  • Thick hood foam to safe broadheads
  • Belt loop
  • Meant for sporting solely on the fitting facet
  • Leather-based thigh lashes


  • Stows arrows proper in your hip for fast loading into your bow
  • Leather-based development and foam within the hood defend you from razor-sharp broadheads
  • Lashed to your thigh, the quiver strikes along with your leg as you stalk
  • Rubber shaft grippers maintain arrows securely


  • Not superb for tree stand or floor blind looking
  • Arrows are extra uncovered to brush whereas stalking and might get pried out of the quiver simpler than arrows connected to a bow
The Vista Knight features a foam interior.
The Vista Knight options rubber arrow grippers and a foam inside for storing broadheads. P.J. Reilly

The Vista Knight Looking Quiver is a classy, leather-based quiver that holds 5 arrows. It’s 12 inches lengthy by 8.5 inches throughout and has a loop that connects to a belt worn round your waist. It’s additionally obtained leather-based lashes so you’ll be able to tie the underside of the quiver to your thigh. The arrow shafts are held in place by rubber grippers on the prime, whereas the broadhead-tipped factors are buried in thick foam contained in the hood. 

That foam contained in the hood is what separates the Vista Knight from most different hip quivers available on the market. These are designed primarily for arrows tipped with subject factors, and due to this fact meant extra so for goal archery than looking. Such quivers are not any good for broadheads.

Hip quivers was fairly fashionable amongst bowhunters a few years in the past, however have fallen out of favor in newer occasions. That’s in all probability why there are only a few choices for looking hip quivers immediately. Now, you’re in all probability almost certainly to see conventional archers utilizing such a quiver.

However they’re nice for spot and stalk hunts. With the lashes tied to your thigh, this quiver strikes along with your physique, holding arrows prepared for motion proper in your hip, kind of like a Western six-shooter. If you must crawl in your stomach, you undo the lashes and shove the quiver round your belt to your again.

Mathews and Hoyt Quivers

Mathews and Hoyt are two bow producers which have cultivated devoted fan bases that like to fly the producers’ flags. Die-hard Mathews and Hoyt house owners may have as many Mathews and Hoyt equipment on their bows as they’ll get, together with quivers. If you happen to’re a part of this crowd and you’ve got a Mathews Part 4, you’re simply not going to place a Redline or TighSpot quiver in your bow, though they’ll match.

Happily for Mathews and Hoyt house owners, their producers each make high quality quivers. We’re giving them their very own class as a result of these quivers solely match the bows they’re named for. In order that they’re no good to house owners of bows that don’t say “Mathews” or “Hoyt.” But when your bow does bear a type of names, these are the quivers for you.

Mathews LowPro Removable Quiver

Bow Hunting Gear photo

The LowPro is a five-arrow, quick-detach quiver that follows the Mathews’s total bow design of making a thin bow profile. They’ve obtained the combine relaxation mount and the Bridge-Lock cutouts for mounting a sight and stabilizer – all within the identify of slimming down the bow. In order that they want a quiver that retains that vibe going.

Bow Hunting Gear photo
The LowPro sits tight to the bow. P.J. Reilly

The LowPro includes a single carbon rod and attaches to the bow through connections on the prime of the quiver and the underside. A easy press lever on the backside locks it in place. Raise the lever, and the quiver simply detaches.

The hood is deep and crammed with a pliable foam that holds broadheads firmly. And with the hood and decrease arrow gripper 20 inches aside, the quiver holds arrows in place extra securely and quietly than shorter quivers. You’ll be able to set your bow on the bottom – quiver facet down – and never fear about arrows bending or breaking.

It’s a quiver that’s quiet, very purposeful, low profile, and which is able to enchantment to the Mathews followers who simply gotta have all of the Mathews equipment.

Learn Subsequent: Mathews Part 4 Overview

The Mathews Arrow Web HD Quiver only fits Mathews bows.

The Arrow Internet isn’t Mathews’ newest quiver, however it’s the quiver that can match essentially the most Mathews bows. And it’s been round for a few years as a result of it’s well-made. Accessible in four-arrow or six-arrow variations, the Arrow Internet mounts to Mathews bows through a one-of-a-kind connection.

There’s a metallic piece formed just like the letter “C” that will get bolted to a unique-shaped recess constructed into Mathews risers. The quiver then has two metallic posts on it. The highest one will get seated in a cup on the mounting bracket and the decrease one pivots over a raised finger earlier than seating into its personal cup.

Now that connection retains the quiver seated solidly. It, plus harmonic dampeners within the quiver and the mounting bracket hold this quiver ultra-quiet when you select to shoot with it connected to the bow. However when you press down on that finger on the decrease attachment level on the bracket, the quiver can rapidly be indifferent when you wish to take away it within the tree stand or floor blind.

The hood area is beneficiant and it’s crammed with a rubbery pad that broadheads sink into for practically whole encasement. The arrow grippers simply accommodate customary or micro diameter looking arrows.

The Hoyt Carbon Superlite Stretch only fits Hoyt bows.

The Carbon Superlite Stretch is one other a type of lengthy quivers, measuring 20 inches. Once more, I like that size for stability holding the arrows in place. You’ll be able to shoot your bow with this quiver connected, or it may well rapidly be indifferent at its two mounting factors.

The distinctive function of the Carbon Superlite Stretch is its adjustability. You’ll be able to alter the quiver up or down so the arrows sit in your bow the best way you need. And you can too alter it towards or away from the riser to navigate round different equipment. And when you’re utilizing a Hoyt combine arrow relaxation and the Hoyt picatinny mount to your sight, you’ll be able to pull the Carbon Superlite Stretch insanely tight in opposition to the riser for a low profile.

What to Think about When Shopping for a Quiver

Selecting a looking quiver doesn’t should be an extended, drawn-out course of. If you happen to do your homework and know what you need, you need to have the ability to choose one out in brief order.

The method begins with deciding if you need the quiver to be removable or not. Suppose the way you hunt and the place you hunt, and that call ought to be easy. After all, when you’re undecided, then go together with removable, as a result of you’ll be able to all the time merely go away that quiver connected.

Examine how totally different quivers connect to a bow. If there’s going to be noise, that is the place it’s going to start out. You need the connection to be comfortable—immovable if doable. 

If the quiver is removable, how does the detach system work? You may be detaching and attaching at midnight, so that you don’t need a quiver that requires high-quality motor expertise to place it on or take it off your bow.

Such as you’d do shopping for a automobile, look below the hood. How does a sure quiver maintain arrow factors? You need your factors held firmly in place to maintain them from rattling unfastened. For my part, hoods crammed with foam/rubber are essentially the most safe.

Verify the arrow grippers. You need them to be pliable, so arrows can slip out and in simply, however you don’t need them to be flimsy, or the arrows will vibrate unfastened. Pliable, sturdy arrow grippers are finest. 

General, how properly does the quiver maintain your arrows? If you happen to maintain a quiver that locks arrows in place and one that permits them to maneuver round, you’ll really feel the distinction. 

Select the quiver that holds the variety of arrows you need to take with you on bowhunts and matches your funds, and also you’re all set.


Q: What arrow capability is finest for a quiver?

There are quivers on the market that maintain two arrows and quivers that maintain 10, consider it or not. The 2-arrow quiver goes to be tremendous gentle. The ten-arrow quiver is for certain to have some heft. Arrows are the bowhunter’s ammunition. Ideally, you’ll solely want one arrow to shut the deal on a bowhunt. However it’s all the time good to have backups. And when you’re on a hunt the place a number of species are truthful recreation, you need to be ready for the best-case situation of filling all of your tags in a single outing. Or when you’re heading to the backcountry for every week, you need to have loads of ammunition to get you thru the week, in case your capturing isn’t on level.

Realistically, I can recall 5 hunts in 30 years of bowhunting the place I used two or extra arrows. There was one time once I used all 5. I obtained the buck. Don’t ask why I wanted 5 photographs. What number of arrows do you have to carry to really feel ready? How a lot weight are you keen to haul in your bow to realize that feeling? Reply these questions and you’ll choose your quiver capability.

Q: Fastened or removable?

After arrow capability, that is in all probability the main query bowhunters have when contemplating a brand new quiver. It’s your selection, however listed here are the related components pertaining to every sort.

Fastened-position quivers are usually going to be sturdier when mounted on the bow than detachables. That may be vital when you are usually tough along with your bows, or when you’re stalking by means of heavy cowl. Fastened quivers are usually quieter when capturing as a result of they aren’t made to be eliminated. However that was extra evident 20 years in the past than it’s immediately. There are some critically quiet detachables made immediately.

With fixed-position quivers, you have to get used to having that weight on the bow whereas capturing. If you happen to follow all 12 months with out a quiver on, after which connect one the day earlier than looking season, the load change might be abrupt.

Detachables are usually related to tree stand and floor blind looking, as a result of these bowhunters get to a spot after which don’t transfer. You’ll be able to take your quiver off the bow, and nonetheless have arrows inside fast attain.

Q: How a lot do quivers price?

Looking quivers vary in price from $20 as much as $250. Typically, you’ll be able to rely on the higher-end quivers to be quieter, sturdier and lighter. 
Bear in mind, the job of a quiver is easy. It carries your arrows. However when it doesn’t do this job accurately or quietly, you’ll curse it. Think about that while you weigh how a lot you need to spend.

Last Ideas

Bowhunting quivers aren’t horny. They aren’t meant to be horny. You don’t often hear bowhunters waxing poetic about how a lot they love their quiver. You need it to do its job and by no means have to consider it. Choose the fitting one, and that’s precisely what you’ll get.



No responses yet

Leave a Reply

Your email address will not be published. Required fields are marked *